Keep Hands Clear Labels
(26033)
The ANSI/ASME standards provide guidelines for safety signage, including "Keep Hands Clear" labels indicate areas where it is important to keep hands and other body parts away from potentially hazardous machinery or equipment.
Moving parts can crush and cut. Do not operate with guard removed. Lockout/tagout before servicing` Label
ANSI Warning Safety Label
1.5"x4.5" to 2.75"x8.25"
Rotating parts inside. Keep hands clear. Lockout/tagout before servicing. Label
ANSI Warning Safety Label
1.5"x4.5" to 2.75"x8.25"
Moving parts present. Moving parts can crush and cut. Keep hands away from moving parts. Label
ANSI Warning Safety Label
1.35"x3.375" to 2"x5"
Exposed Belt Drive - Keep Hands Clear During Operation (with Symbol)
ANSI Warning Hand Entanglement Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not remove guard. Lockout/tagout before servicing. Label
Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
Do Not Operate With Guard Removed ANSI Warning Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
Hand Crush Cut ANSI Warning Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Lockout/tagout before servicing. Label
ANSI Warning Hand Entanglement Chain Drive Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Lockout/tagout before servicing. Label
Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
ANSI Hand Crush Warning Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Lockout/tagout before servicing Label
Warning Lockout/Tagout Before Servicing Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Lockout/tagout before servicing Label
Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Lockout procedure before servicing Label
Warning Safety Label
1.5"x3" to 5"x10"
Blade hazard. Keep hands clear. Follow lockout procedure before servicing. Label
Warning Safety Label
1.5"x3" to 5"x10"
Shear hazard. Keep hands clear from under blade. Label
Warning Safety Label
1.5"x3" to 5"x10"
Rotating cutter hazard. Keep hands clear. Disconnect power before servicing. Label
Warning Safety Label
1.5"x3" to 5"x10"
Rotating cutter. Keep hands clear. Lockout/tagout before servicing. Label
Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do NOT operate with guard removed. Do NOT place hands or fingers under guard. Use scrap to remove debris from under guard. Label
Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do NOT operate with guard removed. Do NOT place hands or fingers under guard. Use compressed air to remove debris from under guard Label
Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
Hand Crush Force from Above Warning Label - ANSI
1.5"x3" to 5"x10"
Moving parts can crush and cut. Keep hands clear. Follow lockout procedure before servicing. Label
Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
Hand Cut ANSI Warning Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Lockout/tagout before servicing. Label
Hand Crush Warning Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
ANSI Warning Cutting of Fingers or Hand with Rotating Blade/Screw/Auger Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Keep hands clear while operating machine Label
Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
ANSI Hand Cut Force from Above Warning Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Keep hands clear. Follow lockout procedure before servicing. Label
ANSI Warning Safety Label
1.5"x3" to 5"x10"
Keep hands clear. Moving parts. Label
ANSI Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
Hand Crush Force From Right ANSI Warning Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Keep hands clear. Follow lockout procedure before servicing. Label
ANSI Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing Label
ANSI Warning Mechanical Hand Cut Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Follow lockout procedure before servicing. Label
Hand Crush ANSI Warning Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Lockout/tagout before servicing. Label
ANSI Warning Hand Crush Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Keep hands clear. Do not operate with guard removed. Label
ANSI Warning Pinch Point Entanglement Gears Label
1.5"x3" to 5"x10"
MOVING PARTS. Keep hands away from chamber area while in operation. Label
ANSI Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Lockout procedure before servicing Label
ANSI Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Keep hands clear while operating machine. Label
ANSI Warning Safety Label
1.5"x3" to 5"x10"
Moving parts can crush and cut. Do not operate with guard removed. Label
ANSI Warning Safety Label
1.5"x3" to 5"x10"
Keep Hands Away
ANSI Warning Label with Detachable Arrow
3.5"x5"
Keep Hands Away from Gears
ANSI Warning Label with Detachable Arrow
3.5"x5"
Keep Hands Away from Rollers
ANSI Warning Label with Detachable Arrow
3.5"x5"
Keep Hands and Fingers Away from Blade (Rotating Blade Symbol)
ANSI Warning Label with Detachable Arrow
3.5"x5"
Keep Hands and Fingers Away from Blade (Impeller Blade Symbol)
ANSI Warning Label with Detachable Arrow
3.5"x5"
Keep Hands and Fingers Away
ANSI Warning Label with Detachable Arrow
3.5"x5"
10 Good Reasons To Keep Fingers Clear Of This Machine Label
Laminated Vinyl Label, 3.5in. x 5in.
3.5"x5"
Keep Hands Away From Machinery Label
3.5in. x 5in. Laminated Vinyl Label
3.5"x5"
Warning: Do Not Touch Any Moving Part When Machine Is Running Label
3.5in. x 5in. Laminated Vinyl Label
3.5"x5"
Warning: Do Not Touch Any Moving Part When Machine Is Running Label
3.5in. x 5in. Warning Laminated Vinyl 5 Labels/Pack
3.5"x5"
Keep Hands Away From Machinery Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
10 Good Reasons To Keep Fingers Clear Of This Machine Label
3.5in. x 5in. Laminated Vinyl Labels (Pack Of 5)
3.5"x5"
Warning: Keep Hands Away Label
3.5in. x 5in. Laminated Vinyl Labels (Set Of 5)
3.5"x5"
Warning: Keep Hands Clear Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
Warning: Keep Hands Clear When Equipment Is Running Label
3.5in. x 5in. Laminated Vinyl Labels (Set Of 5)
3.5"x5"
Warning: Keep Hands Out Of Moving Machinery Label
3.5in. x 5in. Laminated Vinyl Labels (Set Of 5)
3.5"x5"
Warning: Watch Your Hands And Fingers Label
3.5in. x 5in. Laminated Vinyl Labels (Set Of 5)
3.5"x5"
Warning: Keep Hands Away Label
OSHA Warning Label
3.5"x5"
Warning: Keep Hands Clear When Equipment Is Running Label
OSHA Warning Label
3.5"x5"
Warning: Watch Your Hands And Fingers Label
OSHA Warning Label
3.5"x5"
Warning: Keep Hands Clear Label
OSHA Warning Label
3.5"x5"
Warning: Keep Hands Out Of Moving Machinery Label
OSHA Warning Label
3.5"x5"
Warning: Keep Hands Out of Machinery (with gear graphic) Sign
OSHA Warning Sign
3.5"x5" to 10"x14"
Warning: Keep Hands Out Of Machinery (with graphic on right) Sign
Warning Sign
7"x10" to 10"x14"
Warning: Keep Hands Out Of Machinery (with graphic), Vertical Sign
OSHA Warning Sign
7"x10" to 10"x14"
Keep Hands Out Of Machinery (with graphic) Sign
ANSI Warning Sign
3.5"x5" to 10"x14"
Do Not Put Hands Beyond This Point (with STOP hand Symbol)
ANSI Warning Label
3.5"x5" to 5"x7"
Moving parts can crush and cut. Do not operate with guard removed. Lockout/tagout before servicing Label
Lockout Tagout Warning Label
1.5"x3" to 5"x10"
Caution Keep Hands Clear Labels
(119062)
Caution signs in yellow and black get the right attention. Horizontal signs are available in OSHA and ANSI design formats.
Avoid Sharp Edges (with Hand Symbol)
ANSI Caution Label
5"x10"
Caution: Keep Hands Clear (small) Label
1.5in. x 3in. Laminated Vinyl Label
1.5"x3"
Caution: Keep Hands Clear Of Moving Parts And Pulleys Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
Caution: Keep Hands Out Of Moving Machinery Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
Caution: Keep Hands And Fingers Away Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
Caution: Keep Hands Out Of Moving Machinery Label
OSHA Caution Label
3.5"x5"
Caution: Keep Hands Clear Sign
OSHA Caution Sign
3.5"x5" to 10"x14"
Caution: Keep Hands Clear Of Moving Parts And Pulleys Label
OSHA Caution Label
3.5"x5"
Caution: Keep Hands And Fingers Away Label
OSHA Caution Label
3.5"x5"
Danger Keep Hands Clear Labels
(119063)
Danger Signs give a clear picture to everyone who has received safety training. Universal patterns on the signs are understood across the industry.
Moving Parts Can Crush And Cut - Keep Hands Clear, Follow Lockout Procedure Before Servicing (with Graphic)
Bilingual ANSI Danger / Peligro Label
1.5"x4.5" to 2.75"x8.25"
Moving Saw! Keep Hands Clear Disconnect Power Before Servicing Or Changing Blades (With Graphic)
ANSI Danger Safety Label
1.5"x3" to 2.75"x5.5"
Do Not Wear Gloves When Operating This Machine (With Graphic)
ANSI Danger Safety Label
1.5"x3" to 2.75"x5.5"
Moving Parts And Materials Can Cut And Crush, Keep Hands Clear, Lockout/Tagout
ANSI Hand Cut Danger Label
1.5"x3" to 5"x10"
Blade hazard. Keep hands and feet away. Operate only with rubber skirt in place. Label
Danger Safety Label
1.5"x3" to 5"x10"
Moving blade. Keep hands clear while machine is operating. Turn power OFF before servicing. Label
Danger Safety Label
1.5"x3" to 5"x10"
Danger: Moving Parts Will Cause Severe Injury Keep Away Label
2.5in. x 5in. Laminated Vinyl Labels
2.5"x5"
Danger: Keep Hands Away From Rollers (with arrow) Label
3.5in. x 5in. OSHA Danger Laminated Vinyl Label with Arrow
3.5"x5"
Danger: Keep Hands Away (with arrow) Label
3.5in. x 5in. OSHA Danger Laminated Vinyl Label with Arrow
3.5"x5"
Keep Hands Clear Of Moving Machinery
ANSI Danger Label with Detachable Arrow
3.5"x5"
Danger: Keep Hands Away From Rollers (with arrow) Label
3.5in. x 5in. Laminated Vinyl 5 Labels/Pack with Arrow
3.5"x5"
Danger: Keep Hands Away (with arrow) Label
3.5in. x 5in. Laminated Vinyl 5 Labels/Pack with Arrow
3.5"x5"
Danger: Sharp Edges Will Cut Keep Fingers Clear Label
3.5in. x 5in. Set of 5 Laminated Vinyl Labels
3.5"x5"
Keep Hands Clear Of Moving Machinery
OSHA Danger Label
2"x3" to 10"x14"
Danger: Keep Hands Clear When Equipment Is Running Label
3.5in. x 5in. Laminated Vinyl 5 Labels/Pack
3.5"x5"
Danger: Moving Machinery Keep Hands and Feet Clear Label
3.5in. x 5in. Laminated Vinyl Labels (Pack of 5)
3.5"x5"
Danger: Rotating Blades Keeps Hands Away Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
Danger: Keep Hands Away From Gears Label
3.5in. x 5in. Laminated Vinyl 5 Labels/Pack
3.5"x5"
Danger: Keep Hands Clear Label
3.5in. x 5in. Laminated Vinyl 5 Labels/Pack
3.5"x5"
Danger: Keep Hands And Fingers Away From Blade Label
3.5in. x 5in. Laminated Vinyl 5 Labels/Pack
3.5"x5"
Danger: Extreme Cold Do Not Touch Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
Danger: Keep Hands Away From Rollers (with graphic) Sign
OSHA Machine Hazards Sign
7"x10" to 10"x14"
Danger: Keep Hands Clear Sign
OSHA Danger Sign
3.5"x5" to 10"x14"
Danger: Sharp Edges Will Cut Keep Fingers Clear Label
OSHA Danger Label
3.5"x5"
Danger: Rotating Blades Keeps Hands Away Label
OSHA Danger Label
3.5"x5"
Danger: Keep Fingers Clear Of Machine While In Motion Sign
OSHA Danger Sign
7"x10" to 10"x14"
Danger: Keep Hands Away From Gears Label
OSHA Danger Label
3.5"x5"
Danger: Keep Hands Clear When Equipment Is Running Label
OSHA Danger Label
3.5"x5"
Danger: Keep Hands And Fingers Away From Blade Label
OSHA Danger Label
3.5"x5"
Danger: Keep Hands Clear While Belt Is In Motion Sign
OSHA Danger Sign
7"x10" to 10"x14"
Danger: Keep Hands Out Of Machinery Sign
OSHA Danger Sign
7"x10" to 10"x14"
Danger: Keep Hands Clear When Equipment Is Running (with graphic) Sign
OSHA Danger Sign
7"x10" to 10"x14"
Danger: Keep Hands Away (with graphic) Sign
OSHA Danger Sign
7"x10" to 10"x14"
Danger: Keep Hands Clear Label
OSHA Danger Label
3.5"x5"
Danger: Extreme Cold Do Not Touch Label
OSHA Danger Label
3.5"x5"
Keep Hands Away
Danger Arrow Label
Watch Your Fingers And Hands
Danger Arrow Label
Keep Hands Away From Rollers
Danger Arrow Label
Danger: Rotating Blade Keep Hands Away, Peligro Najawas Rotativas Mantengalas Manos Fuera Sign
Bilingual OSHA Danger / Peligro Sign
3.5"x5" to 12"x18"
Danger: Keep Hands and Fingers Away (with graphic) Sign
ANSI Danger Sign
3.5"x5" to 12"x18"
Hands Safety Labels
(74603)
These labels mark areas where hands should not be placed or where hand access is restricted due to the risk of injury. They are common on heavy machinery and equipment.
Rotating shaft. Rotating parts and shaft can cause severe injury .Lockout power before removing guard Label
ANSI Warning Safety Label
1.5"x4.5" to 2.75"x8.25"
Shear hazard. Moving parts can cause severe injury. Lock out power before inspection or service. Label
ANSI Warning Safety Label
1.5"x4.5" to 2.75"x8.25"
Danger: Watch Your Hands And Fingers (small) Label
1.5in. x 3in. Laminated Vinyl Label
1.5"x3"
Danger: Watch Your Fingers And Hands (with arrow) Label
3.5" x 5" Laminated Vinyl Label with Arrow
3.5"x5"
Danger: Watch Your Fingers And Hands (with arrow) Label
3.5in. x 5in. Laminated Vinyl Labels with Arrow
3.5"x5"
Danger: Watch Your Hands And Fingers (small) Label
1.5in. x 3in. Set of 5 Laminated Vinyl Labels
1.5"x3"
Danger: Never Reach Into Moving Machinery Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
Danger: Watch Your Hands And Fingers Label
3.5in. x 5in. Set of 5 Laminated Vinyl Labels
3.5"x5"
Watch Your Hands And Fingers With Graphic
OSHA Danger Label
2"x3" to 10"x14"
Danger: Moving Parts Label
OSHA Danger Label
3.5"x5"
Danger: Never Reach Into Moving Machinery Label
OSHA Danger Label
3.5"x5"
Danger: Never Place Hands Under Ram Or Die Area Label
3.5in. x 5in. Laminated Vinyl 5 Labels/Pack
3.5"x5"
Danger: Moving Machinery Do Not Enter Label
OSHA Danger Label
3.5"x5"
Danger: Never Place Hands Under Ram Or Die Area Label
OSHA Danger Label
3.5"x5"
Danger: Watch Your Hands And Fingers Label
OSHA Danger Label
3.5"x5"
Sharp Edges Use Extreme Caution Label
3.5in. x 5in. Laminated Vinyl Labels
3.5"x5"
Sharp Edges Use Extreme Caution Label
3.5in. x 5in. Laminated Vinyl Label
3.5"x5" to 10"x14"
Caution: Be Alert Moving Parts Sign
OSHA Caution Sign
3.5"x5" to 10"x14"
Caution: Read Instructions Before Using Label
OSHA Caution Label
3.5"x5"
Rotating parts and shaft can cause severe injury. Lock out power and allow machine to stop before opening. Label
ANSI Warning Safety Label
1.5"x3" to 5"x10"
Pinch Point Keep Hand Clear Labels
(119059)
These labels are often designed with clear and concise wording, accompanied by easily recognizable symbols or pictograms.
Pinch Point Keep Hands Clear
ANSI Warning Label with Detachable Arrow
3.5"x5"
Pinch Points Moving Parts Can Crush Or Cut. Keep Clear!
ANSI Warning Label with Detachable Arrow
3.5"x5"
Pinch Point - Keep Hands Clear
Arrow Safety Label
1"x2" to 2"x4"
Pinch Point - Keep Hands Clear
Arrow Safety Label
1"x2" to 2"x4"
Keep Hands Clear Labels - Related Products
(77441)
ANSI Danger Safety Label : Moving Saw! Keep Hands Clear... Part #:LB-2842 1.5" x 3" Vinyl (with heavy adhesive) Verified PurchaseLook good
Look good, last long time...